The Speedy tester is a portable system comprising a vessel with an integral pressure gauge, a weighing scale and a carry case.

A small 40g sample of the material is prepared, weighed and placed into the vessel. A reagent is then added and the vessel is sealed and shaken to mix the reagent with the sample.

Free moisture within the sample reacts with the reagent to produce a gas and pressure rise within the vessel that is proportional to the amount of moisture. The moisture content value is then read directly form the calibrated pressure gauge.

All the component parts of the Speedy 2000 series have been selected for their quality, functionality and durability for use in demanding field or site locations.

Speedy Moisture Testers are used throughout the world by a diverse range of industries to measure the moisture content of materials including soils, aggregates, concrete, sand and powders.

Principal users include geotechnical engineers on civil engineering projects, building surveyors and restorers. Other substantial user groups include mining , steel production,foundries and ceramics.

Applications:



Road & Highways
Knowledge of the moisture content of soil is crucial throughout geotechnical engineering practice. Engineers use the Speedy for field control of compacted earth embankments and other structures and to measure the water content of soil to ensure it is within specified ranges.

Confidence in the test results is crucial, but the the test equipment also has to be robust and simple to use. The Speedy tester meets both of these requirements.



Aggregates, Sand and Concrete
The moisture content of freshly mixed concrete affects the workability, blending, segregation, strength and drying rate of the finished product. The Speedy tester is an ideal on-site quality control tool that tenables the site manager to ensure best practice is being followed. Moisture levels of aggregates and sand can be chcecked prior to use to ensure that the correct amount of water is added when mixing with cement. The moisture content of ready-mix concrete can be checked on site arrival to ensure it is within specification.



Building Restoration & Refurbishment
Building surveyors involved with diagnosing the cause of dampness in buildings use the Speedy tester to dettermine the moisture level in walls and floors. The Speedy complements moisture meters and hygrometers that are also used for diagnosis.

If the structure under investigation is contaminated with conductive hygroscopic salts, moisture meter readings may not truly reflect the moisture condition. Ambiguity that may be associated with interpretng moisture meter readngs in contaminated material are reduced by also measuring the actual moisture content of wall or floor samples with the Speedy tester and by using a hygrometer to measure the material's equilibrium relative humidity (ERH).



Solid Floors
If moisture-related floor failures are to be avoided, concrete floor slabs, cementitious screeds and anhydrite screeds have to be in a dry condition before decorative floor finishes, including wood, vinyl and carpet are laid.

Many countries have adopted floor testing standards that use ERH measuremnet techniques whilst others use the DIN18365 standard which specifies moisture content measurement techniques. The Speedy tester is used to measure the moisture content of a sample of material removed from the floor before the decorative finish is laid.

Features:
  Speedy vessel manufactured from cast aluminium and fitted with a calibrated pressure
   gauge
  Electronic balance with large scale pad
  Comprehensive user instructions
  Waterproof and shockproof carry case with high density foam insert

The  Speedy is available in two sizes, the Speedy Standard which can be used for measuring samples up to 10mm in size and a the Speedy Large which measures samples up to 20mm in size.

Technical data	Speedy Standard S-2000 Series		Speedy Standard L-2000 Series
Model No:	F-S2000C	F-S2000D	F-L2000C	F-L2000D	F-L2000G
Measurment Range	0-10%	0-20%	0-10%	0-20%	0-50%
Sample Size	12g	6g	40g	20g	8g
Maximum Sample size	10mm	10mm	20mm	20mm	20mm
Nominal Weight	5.5kg	5.5kg	6kg	6kg	6kg

Please note that the Reagent (Calcium Carbide) is not included and should be ordered as a seperate item.

your shipment will include:  1 no. Protimeter Speedy (Large F-L2000C) (In Stock)  1 no. Electronic balance   1 no. Cleaning brush and cloth  1 no. Measuring scoop  1 no. Spare Seal  1 no. Heavy duty carry case with fitted foam inserts  1 no. Instruction Sheet   1 no. 12 Month Warranty   1 no. Comprehensive Leica Dealer  Technical Advice & Support